Free shipping on all orders over £50 $50 and €55

Orders from Europe and US shipped from our French & California warehouses.

Your cart

Your cart is empty

Check out these collections.

Our mid-size range case – ideal for radio mics too large for our small case. Used by sound engineers worldwide.

This video shows you how to use the TC clamp sealing system as used on all our radio microphone cases. Follow instructions carefully as there is a small trick - leave a gap between the sealing bars before closing the clamp levers.


   
Key Features
  • Use all buttons and switches through the case
  • Like most of our cases it'll float if you drop it in the drink
  • Feed out a wire of up to 1/10th inch / 3.5mm diameter from the case
  • The seams are high-frequency welded to form a super-strong bond
  • Waterproofness Warning!: This case features our 'TC' Aquaclip which makes the case waterproof to IPX6 (a quick dunking should be fine, but not prolonged immersion).
  • As used by film crews and sound engineers all over the world!
  • The other two sizes are the 158B Radio Microphone Case and 558 Connected Electronics

How waterproof is it?
 
It's Stormproof (protected against powerful water jets - click on the icon for more) Can people swim with it? Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you're swimming on your front, and on your tummy if you're swimming on your back, so that it spends as little time submerged as possible. We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.

Important Notes:
  
Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion. When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage. As long as you follow this instruction the clamp will be watertight with or without a wire/tube. The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
  
https://www.youtube.com/watch?v=Fky5j_8Aw-g

Made in UK
  

(code Q548)

Waterproof Radio Microphone Case - Medium

Regular price £58.00
Unit price
per 
Fast Shipping
Secure payment
Size Guide [dimensions shown are max. internal capacity]
Tax included. Shipping calculated at checkout.

Material Composition? Read More

Have questions? Click to Email us

Free Shipping for orders over £50/$50/€55

Our mid-size range case – ideal for radio mics too large for our small case. Used by sound engineers worldwide.

This video shows you how to use the TC clamp sealing system as used on all our radio microphone cases. Follow instructions carefully as there is a small trick - leave a gap between the sealing bars before closing the clamp levers.


   
Key Features
  • Use all buttons and switches through the case
  • Like most of our cases it'll float if you drop it in the drink
  • Feed out a wire of up to 1/10th inch / 3.5mm diameter from the case
  • The seams are high-frequency welded to form a super-strong bond
  • Waterproofness Warning!: This case features our 'TC' Aquaclip which makes the case waterproof to IPX6 (a quick dunking should be fine, but not prolonged immersion).
  • As used by film crews and sound engineers all over the world!
  • The other two sizes are the 158B Radio Microphone Case and 558 Connected Electronics

How waterproof is it?
 
It's Stormproof (protected against powerful water jets - click on the icon for more) Can people swim with it? Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you're swimming on your front, and on your tummy if you're swimming on your back, so that it spends as little time submerged as possible. We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.

Important Notes:
  
Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion. When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage. As long as you follow this instruction the clamp will be watertight with or without a wire/tube. The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
  
https://www.youtube.com/watch?v=Fky5j_8Aw-g

Made in UK
  

(code Q548)

Quality Manufacturing

Aquapac have been making waterproof cases for 40 years in the UK. We are committed to maintaining the highest standards, We test each production run in our pressure tanks. We work with the best precision toolmakers to ensure top quality.

Committed to Sustainability

The majority of Aquapac cases are made from biodegradable and recyclable plastics. Our products are designed to be used thousands of times. We reduce our already minimal packaging each year and only used recycled board.

We have minimal waste and our machines are powered by
solar panels on our factory roof. Over 80% of our raw materials are sourced in the UK. We also make over
80% of our product range here at our factory.

NO HASSLE RETURNS

Change your mind or ordered the wrong size? Don’t worry, that’s cool. We’ll refund or swap it for you as long as it’s in new condition.

5 YEAR WARRANTY

We have been making cases since 1983 at our UK factory and we stand by the quality of our gear. Check our warranty terms at the bottom of the page.

FREE SHIPPING*

UK: for orders over £50 – under £50 fixed cost of £4
EU: orders over €60 – under €60 check your shopping cart for delivery costs.
Continental USA: orders over $50 – under $50 check your shopping cart for delivery costs