LIMITED EDITION of 50 - Our smallest waterproof radio mic case - max length of radio mic just under 11cms - used by professional sound engineers worldwide.
Check size guide.
This case is designed for electronics which require a thin wire to be connected to them at all times. The special wire-thru clamp at one end allows that wire to stay connected, and be waterproof. The case is usually used by professionals with specialist electronic devices, but could be used for a permanently connected small tablet, large phone or audio player.
Key Features- Use all buttons and switches through the case
- Like most of our cases it'll float if you drop it in the drink
- Feed out a wire of up to 3.5mm diameter from the case
- The seams are high-frequency welded to form a super-strong bond
- Waterproofness Warning!: This case features our 'TC' Aquaclip which makes the case waterproof to IPX6 (a quick dunking should be fine, but not prolonged immersion).
Can people swim with it?
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you're swimming on your front, and on your tummy if you're swimming on your back, so that it spends as little time submerged as possible. We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
https://www.youtube.com/watch?v=Fky5j_8Aw-g
Important Notes:
Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion. When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage. As long as you follow this instruction the clamp will be watertight with or without a wire/tube. The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
Waterproof Radio Microphone Case - Micro
Waterproof Radio Microphone Case - Micro
Composition du matériau? Lire la suite
Vous avez des questions ? Cliquez pour Envoyez-nous un e-mail
Livraison gratuite pour les commandes supérieures à 50 £/50 $/55 €
LIMITED EDITION of 50 - Our smallest waterproof radio mic case - max length of radio mic just under 11cms - used by professional sound engineers worldwide.
Check size guide.
This case is designed for electronics which require a thin wire to be connected to them at all times. The special wire-thru clamp at one end allows that wire to stay connected, and be waterproof. The case is usually used by professionals with specialist electronic devices, but could be used for a permanently connected small tablet, large phone or audio player.
Key Features- Use all buttons and switches through the case
- Like most of our cases it'll float if you drop it in the drink
- Feed out a wire of up to 3.5mm diameter from the case
- The seams are high-frequency welded to form a super-strong bond
- Waterproofness Warning!: This case features our 'TC' Aquaclip which makes the case waterproof to IPX6 (a quick dunking should be fine, but not prolonged immersion).
Can people swim with it?
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you're swimming on your front, and on your tummy if you're swimming on your back, so that it spends as little time submerged as possible. We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
https://www.youtube.com/watch?v=Fky5j_8Aw-g
Important Notes:
Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion. When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage. As long as you follow this instruction the clamp will be watertight with or without a wire/tube. The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
Fabrication de qualité
Aquapac fabrique des boîtiers étanches depuis 40 ans au Royaume-Uni. Nous nous engageons à maintenir les normes les plus élevées. Nous testons chaque cycle de production dans nos réservoirs sous pression. Nous travaillons avec les meilleurs outilleurs de précision pour garantir une qualité supérieure.
Engagé envers la durabilité
La majorité des valises Aquapac sont fabriquées à partir de plastiques biodégradables et recyclables. Nos produits sont conçus pour être utilisés des milliers de fois. Nous réduisons chaque année nos emballages déjà minimes et utilisons uniquement du carton recyclé.
Nous avons un minimum de déchets et nos machines sont alimentées par
panneaux solaires sur le toit de notre usine. Plus de 80 % de nos matières premières proviennent du Royaume-Uni. Nous relookons également
80 % de notre gamme de produits ici dans notre usine.
RETOUR SANS TRACAS
Vous avez changé d'avis ou commandé la mauvaise taille ? Ne vous inquiétez pas, c'est cool. Nous le rembourserons ou l’échangerons pour vous tant qu’il est à l’état neuf.
GARANTIE 5 ANS
Nous fabriquons des coques depuis 1983 dans notre usine britannique et nous garantissons la qualité de nos équipements. Consultez nos conditions de garantie en bas de page.
LIVRAISON GRATUITE*
Nous stockons nos produits au Royaume-Uni, aux États-Unis et dans l'UE. Nous pouvons donc vous proposer la livraison GRATUITE lorsque vous dépensez plus de 50 € au Royaume-Uni, 50 $ aux États-Unis et 50 € dans l'UE.