Free shipping on all orders over £50 $50 and €55

Orders from Europe and US shipped from our French & NY warehouses.

Il tuo carrello

Il tuo carrello è vuoto

Check out these collections.

Our premium offering for small compact cameras. This has a specially moulded hard lens section which is 30mm high and fits any lens up to 40mm in diameter. The lens is moulded from optically clear acrylic. Waterproof to 10m/30’.
  

Use your camera safely at the beach, on the boat, in the sea or in the pool.

Even underwater! See photos taken through the case under and in the water attached.

What’s so special about this case?

  • It allows you to get photos when it’s really wet. And yes, even underwater!
  • It’s sand-proof as well as waterproof so you can take your camera safely to the beach (Sand destroys even more cameras than water)
  • It comes supplied with 3 desiccant sachets to absorb condensation in humid climates.

What else do I need to know?

  • Your camera should float in this case – but make sure you test yours in a basin before you launch it into the sea!
  • There’s enough room for some zoom use, but not much.
  • You might want to consider the Mini with Hard Lens.

Is this the right size for my camera?

  • This case was designed for small compact cameras.
  • Check out the Size Guide.

What else do I need to know?

  • This case is 100% PVC-free. It is made of a special TPU which is thin enough for you to operate your camera through, but still remarkably strong.
  • The seams are high frequency welded to form a super-strong bond.
  • The Aquaclip® seal opens and closes with a quick twist of two levers. And everything stays in one piece even when it’s open.
  • We patented the Aquaclip system back in the 1990s. We have sold over 5 million Aquapacs, the vast majority of which are sealed with an Aquaclip. So you can have confidence that the waterproofness of our system is well-proven!
  • Caution: It’s not foolproof. If you’re not careful you could get a hole in the case or let water in when opening it. But as long as you treat it sensibly and carefully it will give you many years of use.
  • It’s supplied with 3 desiccant sachets to absorb condensation in humid climates but we recommend you order extras – see Accessories.
  • Do please check out the care instructions.

Made in UK

Code 428

Waterproof Camera Case - Mini With Hard Lens

Prezzo di listino £19.95
Prezzo unitario
per 
Fast Shipping
Secure payment
Size Guide [dimensions shown are max. internal capacity]
Imposte incluse. Spese di spedizione calcolate al check-out.

Material Composition? Read More

Have questions? Click to Email us

Free Shipping for orders over £50/$50/€55

Our premium offering for small compact cameras. This has a specially moulded hard lens section which is 30mm high and fits any lens up to 40mm in diameter. The lens is moulded from optically clear acrylic. Waterproof to 10m/30’.
  

Use your camera safely at the beach, on the boat, in the sea or in the pool.

Even underwater! See photos taken through the case under and in the water attached.

What’s so special about this case?

  • It allows you to get photos when it’s really wet. And yes, even underwater!
  • It’s sand-proof as well as waterproof so you can take your camera safely to the beach (Sand destroys even more cameras than water)
  • It comes supplied with 3 desiccant sachets to absorb condensation in humid climates.

What else do I need to know?

  • Your camera should float in this case – but make sure you test yours in a basin before you launch it into the sea!
  • There’s enough room for some zoom use, but not much.
  • You might want to consider the Mini with Hard Lens.

Is this the right size for my camera?

  • This case was designed for small compact cameras.
  • Check out the Size Guide.

What else do I need to know?

  • This case is 100% PVC-free. It is made of a special TPU which is thin enough for you to operate your camera through, but still remarkably strong.
  • The seams are high frequency welded to form a super-strong bond.
  • The Aquaclip® seal opens and closes with a quick twist of two levers. And everything stays in one piece even when it’s open.
  • We patented the Aquaclip system back in the 1990s. We have sold over 5 million Aquapacs, the vast majority of which are sealed with an Aquaclip. So you can have confidence that the waterproofness of our system is well-proven!
  • Caution: It’s not foolproof. If you’re not careful you could get a hole in the case or let water in when opening it. But as long as you treat it sensibly and carefully it will give you many years of use.
  • It’s supplied with 3 desiccant sachets to absorb condensation in humid climates but we recommend you order extras – see Accessories.
  • Do please check out the care instructions.

Made in UK

Code 428

Quality Manufacturing

Aquapac have been making waterproof cases for 40 years in the UK. We are committed to maintaining the highest standards, We test each production run in our pressure tanks. We work with the best precision toolmakers to ensure top quality.

Committed to Sustainability

The majority of Aquapac cases are made from biodegradable and recyclable plastics. Our products are designed to be used thousands of times. We reduce our already minimal packaging each year and only used recycled board.

We have minimal waste and our machines are powered by
solar panels on our factory roof. Over 80% of our raw materials are sourced in the UK. We also make over
80% of our product range here at our factory.

NO HASSLE RETURNS

Change your mind or ordered the wrong size? Don’t worry, that’s cool. We’ll refund or swap it for you as long as it’s in new condition.

5 YEAR WARRANTY

We have been making cases since 1983 at our UK factory and we stand by the quality of our gear. Check our warranty terms at the bottom of the page.

FREE SHIPPING*

UK: for orders over £50 – under £50 fixed cost of £4
EU: orders over €60 – under €60 check your shopping cart for delivery costs.
Continental USA: orders over $50 – under $50 check your shopping cart for delivery costs