Our most popular waterproof radio mic case used by professional sound engineers worldwide.
This video shows you how to use the TC clamp sealing system as used on all our radio microphone cases. Follow instructions carefully as there is a small trick - leave a gap between the sealing bars before closing the clamp levers.
Check size guide.
What's so special about this case?
- This case is designed for electronics which require a thin wire to be connected to them at all times.
- The special wire-thru clamp at one end allows that wire to stay connected, and be waterproof.
- The case is usually used by professionals with specialist electronic devices.
- Suits mini radio mics from brands such as Audio Ltd and Audio Engineering Micron.
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it'll float if you drop it in the drink
- Seals around a wire of up to 1/10th in / 3.5mm diameter
- The seams are high-frequency welded to form a super-strong bond.
- This case features our TC Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion.
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Waterproof Radio Microphone Case - Small
Waterproof Radio Microphone Case - Small
Our most popular waterproof radio mic case used by professional sound engineers worldwide.
This video shows you how to use the TC clamp sealing system as used on all our radio microphone cases. Follow instructions carefully as there is a small trick - leave a gap between the sealing bars before closing the clamp levers.
Check size guide.
What's so special about this case?
- This case is designed for electronics which require a thin wire to be connected to them at all times.
- The special wire-thru clamp at one end allows that wire to stay connected, and be waterproof.
- The case is usually used by professionals with specialist electronic devices.
- Suits mini radio mics from brands such as Audio Ltd and Audio Engineering Micron.
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it'll float if you drop it in the drink
- Seals around a wire of up to 1/10th in / 3.5mm diameter
- The seams are high-frequency welded to form a super-strong bond.
- This case features our TC Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion.
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Quality Manufacturing
Aquapac have been making waterproof cases for 40 years in the UK. We are committed to maintaining the highest standards, We test each production run in our pressure tanks. We work with the best precision toolmakers to ensure top quality.
Committed to Sustainability
The majority of Aquapac cases are made from biodegradable and recyclable plastics. Our products are designed to be used thousands of times. We reduce our already minimal packaging each year and only used recycled board.
We have minimal waste and our machines are powered by
solar panels on our factory roof. Over 80% of our raw materials are sourced in the UK. We also make over
80% of our product range here at our factory.
NO HASSLE RETURNS
Change your mind or ordered the wrong size? Don’t worry, that’s cool. We’ll refund or swap it for you as long as it’s in new condition.
5 YEAR WARRANTY
We have been making cases since 1983 at our UK factory and we stand by the quality of our gear. Check our warranty terms at the bottom of the page.
FREE SHIPPING*
UK: for orders over £50 – under £50 fixed cost of £4
EU: orders over €60 – under €60 check your shopping cart for delivery costs.
Continental USA: orders over $50 – under $50 check your shopping cart for delivery costs