The Insulin Pump case range is now available in this Micro size - limited edition of 50 units. Otherwise buy Mini, Small or Medium case.The Waterproof cases allow you to bathe, shower and paddle in water. We recommend they be used for very brief immersion no more than 50cms in depth and for no more than 15 seconds.
Key Features
Key Features
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it’ll float if you drop it in the drink
- The seams are high-frequency welded to form a super-strong bond
- This case features our ‘TC’ Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion (see below for more).
But can I swim with it?Although it’s not designated as Submersible we have had reports from many, many users that in practice they or their children have enjoyed swimming with our cases with no problem whatsoever (the vast majority of our customers have bought the case for their children). We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
(code S144 ( Micro)
(code S144 ( Micro)
Waterproof Insulin Pump Case Micro
Envío rápido
pago seguro
Waterproof Insulin Pump Case Micro
Impuesto incluido.
Envío calculado en el momento de la compra.
¿Composición del material? Leer más
¿Tiene preguntas? Haga clic para enviarnos un correo electrónico
Envío gratuito para pedidos superiores a £50/$50/€55
The Insulin Pump case range is now available in this Micro size - limited edition of 50 units. Otherwise buy Mini, Small or Medium case.The Waterproof cases allow you to bathe, shower and paddle in water. We recommend they be used for very brief immersion no more than 50cms in depth and for no more than 15 seconds.
Key Features
Key Features
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it’ll float if you drop it in the drink
- The seams are high-frequency welded to form a super-strong bond
- This case features our ‘TC’ Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion (see below for more).
But can I swim with it?Although it’s not designated as Submersible we have had reports from many, many users that in practice they or their children have enjoyed swimming with our cases with no problem whatsoever (the vast majority of our customers have bought the case for their children). We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
(code S144 ( Micro)
(code S144 ( Micro)
Fabricación de calidad
Aquapac lleva 40 años fabricando fundas impermeables en el Reino Unido. Estamos comprometidos a mantener los más altos estándares. Probamos cada ejecución de producción en nuestros tanques de presión. Trabajamos con los mejores fabricantes de herramientas de precisión para garantizar la máxima calidad.
Comprometidos con la Sostenibilidad
La mayoría de las maletas Aquapac están fabricadas con plásticos biodegradables y reciclables. Nuestros productos están diseñados para ser utilizados miles de veces. Cada año reducimos nuestro embalaje, que ya es mínimo, y solo utilizamos cartón reciclado.
Tenemos un desperdicio mínimo y nuestras máquinas funcionan con
Paneles solares en el techo de nuestra fábrica. Más del 80% de nuestras materias primas proceden del Reino Unido. También renovamos
El 80% de nuestra gama de productos aquí en nuestra fábrica.
DEVOLUCIONES SIN PROBLEMAS
¿Cambiaste de opinión o pediste la talla equivocada? No te preocupes, eso está bien. Te lo reembolsaremos o lo cambiaremos siempre que esté en nuevas condiciones.
GARANTÍA DE 5 AÑOS
Fabricamos maletas desde 1983 en nuestra fábrica del Reino Unido y respaldamos la calidad de nuestro equipo. Consulte nuestros términos de garantía en la parte inferior de la página.
ENVÍO GRATIS*
Almacenamos nuestros productos en el Reino Unido, EE. UU. y la UE. Por lo tanto, podemos ofrecer envío GRATUITO cuando gastas más de 50 € en el Reino Unido, 50 $ en EE. UU. y 50 € en la UE.