The Insulin Pump case range is now available in this Micro size - limited edition of 50 units. Otherwise buy Mini, Small or Medium case.The Waterproof cases allow you to bathe, shower and paddle in water. We recommend they be used for very brief immersion no more than 50cms in depth and for no more than 15 seconds.
Key Features
Key Features
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it’ll float if you drop it in the drink
- The seams are high-frequency welded to form a super-strong bond
- This case features our ‘TC’ Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion (see below for more).
But can I swim with it?Although it’s not designated as Submersible we have had reports from many, many users that in practice they or their children have enjoyed swimming with our cases with no problem whatsoever (the vast majority of our customers have bought the case for their children). We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
(code S144 ( Micro)
(code S144 ( Micro)
Waterproof Insulin Pump Case Micro
Expédition rapide
paiement sécurisé
Waterproof Insulin Pump Case Micro
Taxe incluse.
Les frais d'expédition sont calculés au moment du paiement.
Composition du matériau? Lire la suite
Vous avez des questions ? Cliquez pour Envoyez-nous un e-mail
Livraison gratuite pour les commandes supérieures à 50 £/50 $/55 €
The Insulin Pump case range is now available in this Micro size - limited edition of 50 units. Otherwise buy Mini, Small or Medium case.The Waterproof cases allow you to bathe, shower and paddle in water. We recommend they be used for very brief immersion no more than 50cms in depth and for no more than 15 seconds.
Key Features
Key Features
- Use all buttons and switches through the case
- Also protects from dust, dirt and sand
- Supplied with a belt, or you can use your own belt
- Like most of our cases it’ll float if you drop it in the drink
- The seams are high-frequency welded to form a super-strong bond
- This case features our ‘TC’ Aquaclip which makes the case waterproof to IPX6. Temporary immersion is fine, but not continuous immersion (see below for more).
But can I swim with it?Although it’s not designated as Submersible we have had reports from many, many users that in practice they or their children have enjoyed swimming with our cases with no problem whatsoever (the vast majority of our customers have bought the case for their children). We are talking here about splashing around in the pool or the sea, but we are NOT talking about endurance/long-distance swimming.
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
Our testing shows that the TC clamp will let a tiny amount of water in after a period of total immersion. So the best advice we can give is to wear it in the small of your back if you’re swimming on your front, and on your tummy if you’re swimming on your back, so that it spends as little time submerged as possible.Important Note regarding Insulin Pumps and Aquapac casesAquapac commissioned research by Imperial College London into the suitability of their cases for use with insulin pumps.
Results show that in some circumstances insulin flow rate can be reduced by the case. In particular, low flow rates are impeded and as such Aquapac can make no claim regarding the suitability of these cases with insulin pumps. Use of these cases with insulin pumps is entirely at the discretion of the user.
We are advised to recommend that users of Aquapac cases with insulin pumps regularly check their blood sugar levels. Furthermore we strongly recommend that you get the green light from your consultant before use.The tests were conducted by Imperial College of Science, Technology and Medicine using a Roche Accu-Check Spirit insulin pump at a temperature of 20C at flow rates of 2U/hr and 10U/hr.
The amounts of insulin delivered over 60 minutes observed were as follows:2U/hr not in a case – 0.0131g (flow rate of 100%)
2U/hr in Aquapac 150 – 0.0106g (flow rate of 81%)
2U/hr in Aquapac 150 – 0.0056g (2nd test model)(flow rate of 42%)
2U/hr in Aquapac 550 – 0.0121g (flow rate 92%)10U/hr not in case – 0.0864g (flow rate of 100%)
10U/hr in Aquapac 150 – 0.0878g (flow rate of 100%)
10U/hr in Aquapac 550 – 0.0903g (flow rate of 100%)21st August 2006Important Notes
- Cases with this clamp are for surface use only, but will offer protection from temporary submersion. They are not recommended for prolonged immersion.
- When not using the case leave the TC clamp open. If not the wire or tube could eventually cause a permanent distortion of the foam, risking leakage.
- As long as you follow this instruction the clamp will be watertight with or without a wire/tube.
- The maximum thickness of wire/tube around which the TC clamp will seal is 1/10th inch (3.5mm).
Made in UK
(code S144 ( Micro)
(code S144 ( Micro)
Fabrication de qualité
Aquapac fabrique des boîtiers étanches depuis 40 ans au Royaume-Uni. Nous nous engageons à maintenir les normes les plus élevées. Nous testons chaque cycle de production dans nos réservoirs sous pression. Nous travaillons avec les meilleurs outilleurs de précision pour garantir une qualité supérieure.
Engagé envers la durabilité
La majorité des valises Aquapac sont fabriquées à partir de plastiques biodégradables et recyclables. Nos produits sont conçus pour être utilisés des milliers de fois. Nous réduisons chaque année nos emballages déjà minimes et utilisons uniquement du carton recyclé.
Nous avons un minimum de déchets et nos machines sont alimentées par
panneaux solaires sur le toit de notre usine. Plus de 80 % de nos matières premières proviennent du Royaume-Uni. Nous relookons également
80 % de notre gamme de produits ici dans notre usine.
RETOUR SANS TRACAS
Vous avez changé d'avis ou commandé la mauvaise taille ? Ne vous inquiétez pas, c'est cool. Nous le rembourserons ou l’échangerons pour vous tant qu’il est à l’état neuf.
GARANTIE 5 ANS
Nous fabriquons des coques depuis 1983 dans notre usine britannique et nous garantissons la qualité de nos équipements. Consultez nos conditions de garantie en bas de page.
LIVRAISON GRATUITE*
Nous stockons nos produits au Royaume-Uni, aux États-Unis et dans l'UE. Nous pouvons donc vous proposer la livraison GRATUITE lorsque vous dépensez plus de 50 € au Royaume-Uni, 50 $ aux États-Unis et 50 € dans l'UE.